DELLOK A179 / A192 / SA210 SMLS Carbon Steel tube , OD25.4mm I Type Threaded Steel Fin Tube
- Mobile：+8613761381662
- Fax：+86 25 69755709
- Email：commercial@bestfintube.com
Description
A179 / A192 / SA210 SMLS Carbon Steel tube , OD25.4mm I Type Threaded Steel Fin Tube
ASTM A179 / A179M : Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes
ASTM A192 / A192M : Seamless Carbon Steel Boiler Tubes for High-Pressure Service
ASTM A210 / A210M : Seamless Medium-Carbon Steel Boiler and Superheater Tubes
Quick Detail:
General Crimped I Type production capacity | General specifications of l Type fin tubes |
Finning Facility: 2 finning machines; Daily capacity up to 2000 meters; | Tube OD: 12mm Min ~ 50.8mm max. Tube Length: 18,000mm max. Fin Height: 20 mm max. Fin Thickness: generally 0.4mm ~0.6mm Fin Pitch: 2.1 mm (12FPI) min. |
Manufacturing process: Crimped Fins are spirally wrapped onto the base tube, without welding, but spot welded. Non-ferrous tubes and fins on either root soldered or completely tinned.
Surface Protection:
Both bare ends of Crimped fin tubes shall be Hot Dip Galvanzied.
Quality Test:
Crimped Type Fin Tube quality is assured by hydrostatic or pneumatic tests, eddy current tests and tensile tests in order to verify the mechanical bonding between inner and outer tubes.
Delivery condition:
Tube ends are square cut, free burrs, internally dried and air blown clean, externally coated with varnish at both ends. The desiccants are put into each package for continental transporation as well.
Applications:
Climatic industy
Cooling
Heating
Drying
Specifications:
Crimped I type finned ube is combined with two different materials.
| ItemsGeneral MaterialsPopular ASTM MaterialsCore Tube MaterialCarbon Steel Stainless Steel1. Carbon Steel: A179, A192,SA210 Gr A1/C,A106 Gr B2. Stainless Steel: TP304/304L,TP316/TP316L/316Ti, Fins MaterialCarbon Steel,Stainless Steel 1. Carbon steel 2. Stainess Steel : TP304/TP304L , TP316 / TP316L |
| S/R | Descriptions of Crimped I Type Fin Tube | Popular specifications we make |
| 1 | Tube OD | 5/8'' to 3'' (15.8 mm to 76.2 mm) |
| 2 | Fin Height | 1/4'' to 3/4'' or 6.4 mm to 20 mm. |
| 3 | Fin Pitch | 3FPI to 11FPI or 118 FPM to 433 FPM. |
Competitive Advantage:
We have more than 10,000 square meters workshop, including 2 finning machines, daily capacity up to 2,000 Meters.
The finning machines are designed and assembled by ourselves and we can offer you finning machines and all accessories etc...
These finned tubes can be further Hot Dipped Galvanised for surface protection where as the deposition of Zinc also adds up to the efficiency of finned tubes. Maximum Operating Temperature 250° C.
Application Commercial application for air heating or air cooling up to 130° C to 150° C
Using steam / Thermic fluid / Hot water as heating media or water as cooling media.
