Aluminum alloy tube 1060, high electrical conductivity, corrosion resistance

1050 aluminium alloy is an aluminium-based alloy in the "commercially pure" wrought family (1000 or 1xxx series). As a wrought alloy, it is not used in castings. Instead, it is usually formed by extrusion or rolling. It is commonly used in the electrical and chemical industries, on account of having high electrical conductivity, corrosion resistance, and workability.

1050 alloy is also sometimes used for the manufacture of heat sinks, since it has a higher thermal conductivity than other alloys. It has low mechanical strength compared to more significantly alloyed metals. It can be strengthened by cold working, but not by heat treatment.
Alternate names and designations include Al99.5, 3.0255, and A91050. It is described in the following standards:
ASTM B 491: Standard Specification for Aluminum and Aluminum-Alloy Extruded Round Tubes for General-Purpose Applications
ISO 6361: Wrought Aluminium and Aluminium Alloy Sheets, Strips and Plates
Chemical Composition
The alloy composition of 1050 aluminium is:
Aluminium: 99.5% min
Copper: 0.05% max
Iron: 0.4% max
Magnesium: 0.05% max
Manganese: 0.05% max
Silicon: 0.25% max
Titanium: 0.03% max
Vanadium: 0.05% max
Zinc: 0.05% max

Above article is from Wikipedia

ASME SB221 SPECIFICATION FOR ALUMINUM AND ALUMINUM ALLOY EXTRUDED BARS, RODS, WIRE, PROFILES,AND TUBES

Extruded aluminum finned tubes specifications.

Tube OD        :  2''(Max.)

Tube length    :  No limit.

Fin height       :  16mm(Max.)

Fin thickness  : 13FPI / 12FPI / 11FPI / 10FPI / 9FPI / 8FPI....